Plasma Source
PTA Hardfacing
Micro Beam PTA Machine
Plasma Welding
S-TIG Welding Machine
Torches
Accessories
News
Information
Technology
Mine
Oil
Metallurgy
Machinery
Welding
+86 150 2199 6700
Your current location: Home > News
What materials are used in powder surfacing machine?
What power source does the powder surfacing machine use?
How shall we protect ourselves in the operation of machine?
2021
According to Duomu Industrial Xiaobian, the weld width and penetration depend on the arc blowing force of the weld pool, and the flow rate of ion gas plays a decisive role in the capacity of the weld pool. The larger the ion flow of the micr...
Micro-beam plasma welding machine adopts plasma arc welding current less than 30A, and its arc form is combined arc, that is, the dimensional arc and the working arc exist at the same time. When the weld gap is slightly larger, the weld rein...
According to the editor of Duomu Industrial, the corrugated film is generally welded by a micro-beam plasma welding machine. When the thickness of the corrugated film is greater than 0.2mm, it can also be welded by low-power tungsten argon a...
According to the editor of Duomu Industry, a 310A welding current is generally used to weld thin plates with a thickness of 0.080.6mm. Because of the low density of titanium liquid and high surface tension, the small hole effect of the micro...
The editor of Duomu Industrial believes that the micro-beam plasma welding machine has good controllability. During the welding process, factors such as welding current, speed, ion gas flow, welding torch structure and pre-welding treatment ...
The powder surfacing machine uses a plasma arc high-energy density beam as the welding heat source. The powder surfacing machine has the characteristics of energy concentration, high production efficiency, fast welding speed, small stress an...